Bionaire BAP536UV-U - Air Purifier Instruction Guide

HOW YOUR AIR PURIFIER WORKS" width="" />

HOW YOUR AIR PURIFIER WORKS
2-Stage Air Purification System
Your air purifier uses a three stage air purification system to help purify the air that passes through the filter (see Figure 1):

STAGE 1 - HEPA type filter removes up to 99% of airborne allergens as small as 2 microns, including ragweed pollen, grass pollen, tree pollen, household dust, dust mite debris, mold spores and pet dander from the air passing through it.
STAGE 2 - UV BULB and PCO (photocatalytic oxidation) helps to reduce germs, viruses, bacteria and fungi and remove VOC's from the air passing through the system.
GET TO KNOW YOUR AIR PURIFIER
YOUR BIONAIRE ® AIR PURIFIER FEATURES:
ULTRAVIOLET LIGHT
Ultraviolet light is a proven technology used to help reduce various types of bacteria, viruses, fungi and mould spores and is commonly used in hospitals and commercial settings for sanitizing. This air purifier uses a UV-C bulb.
PERMANENT HEPA TYPE FILTER
Permanent HEPA type filter removes up to 99% of airborne allergens as small as 2 microns, including ragweed pollen, grass pollen, tree pollen, household dust, dust mite debris, mold spores and pet dander from the air passing through it. The permanent filter allows for easy maintenance and eliminates the hassle of filter replacement.
THREE SPEED SETTINGS
For optimum air filtration, operate your Bionaire ® air cleaner continuously on the highest (HIGH) setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select the lowest (LOW) setting.

IONIZER
This appliance has an ionizer, which releases negative ions into outgoing filtered air to help the air purification process.
What Are Ions?
Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and completely harmless to humans.
How Does The Ionizer Work?
Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system.
Important Notes:

• Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged.

• After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer's air cleaning effectiveness. You can remove the dust with a soft brush or clean, damp cloth.
• Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors. This may occur more frequently when the filter is nearing the end of its useful product life and unable to capture as many charged particles.
• Excessive amounts of pet dander, dust may decrease the life expectancy of the filter and interfere with the ionization process.

The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on.

Always clean the filter at the recommended intervals (See HEPA FILTER CLEANING INSTRUCTIONS). Using the ionizer with dirty filter may result in dirty particles exiting the air purifier and attracting to walls, carpets, furniture, or other household objects. These dirty particles may prove difficult to remove.

ENERGY STAR ® CERTIFICATION
This product earned the ENERGY STAR ® CERTIFICATION by meeting strict energy efficient guidelines set by the US EPA. The energy efficiency of this ENERGY STAR ® qualified model is measured based on a ratio between the model's CADR for dust and the electrical energy it consumes, or CADR/ Watt.

1. Ionizer Button
2. Power Button And Speed Selection ( /)
3. Uv Button ( )
4. Filtered Air Outlet
5. UV Bulb
6. UV Bulb Access Panel
7. HEPA Type Filter
8. Air Inlet/ Filter door

BEFORE USE

1. Carefully unpack your air purifier.
2. Select a firm, level surface with no obstructions to the air inlets or outlets.
3. HEPA filter is covered by a plastic bag to protect its freshness. Before using your purifier, remove the protective plastic bag from filter:
   • Open the back grill of the air purifier by gently pulling it towards you.
   • Unwrap filter from plastic bag.
   • Insert the permanent HEPA type filter into the unit (see figure 3)
     
     
   • Reinstall the back grill.
4. Plug the power cord into a 120V AC outlet.
5. Always lift your air purifier by the handle of the unit.

OPERATIONS

OPERATING INSTRUCTIONS

• Remove plastic bag from filter before use.
• DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.

To operate your air cleaner:

1. Press the POWER button ( /).
   • The air cleaner will turn on at the optimal filtering speed for normal conditions (HIGH).
2. You can change the filtering speed by pressing the Fan Speed Button (/) until you reach the desired speed: HIGH-MED-LOW.
3. To release negative ions into the filtered air, press the ionizer button to activate the ionizer.
4. To turn the air purifier off, press the POWER Button (/).

USING THE UV LAMP FUNCTION:
Ultraviolet light is a proven technology used to help reduce various types of bacteria, viruses, fungi and mold spores and is commonly used in hospitals and commercial settings for sanitizing. To activate this function in any mode, press UV Button (). The UV () indicator light will illuminate when this function is activated. To deactivate the feature, press the UV button () one more time.
Note: This unit is equipped with a safety interlock switch. Removing the rear grill or the UV bulb access panel will cancel the UV light function and turn off the unit.

CLEANING AND MAINTENANCE

Cleaning the unit:

1. Turn off and unplug the air purifier.
2. The outside of the unit can be cleaned with a soft, clean dampened cloth.
3. The Air Inlet/ Filter Door (see figure 2) can be cleaned with a soft, clean damp cloth.
4. The filtered air outlet can be cleaned of dust with a small soft brush.
5. If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down.

1. NEVER use detergents, gasoline, glass cleaner, furniture polish, paint thinner or other household solvents to clean any part of the air cleaner.

Do not allow moisture to come in contact with the main housing of the air purifier.

HEPA FILTER CLEANING INSTRUCTIONS
Note: On average, Permanant HEPA type filter need to be cleaned every 3-4 months. Filter life will vary depending on air quality and usage.
To clean your Permanent HEPA filter:

1. Turn off and unplug the air purifier before cleaning the filter. Remove the rear grill.
2. Using a vacumm with a brush attachment, remove the easily accessible dust from the filter and grill.
3. Remove the filter from the unit by pulling the tab gently towards you.
4. To clean the permanent HEPA filter, remove the dirty filter from the unit. Using your vacuum cleaner, run the brush attachment along both sides of the filter(s) and clean between the pleated layers. After cleaning, reinstall the cleaned HEPA filter back into the unit. Be sure to install the filter in the correct direction using the arrows on the filter frame as guidance.
5. Install the rear grill back onto the unit and securely latch it in place.

Do not use water, household cleaners or detergents to clean the permanent filter. If the filter become damaged during cleaning, call 1-800-253-2764 to order replacement.
NOTE: Both the UV bulb access panel and the rear grill MUST be installed properly for the unit to operate.

REPLACING THE ULTRAVIOLET (UV) BULB
Over time, the UV-C bulb will lose some intensity. We recommend you replace the UV-C bulb at least once every year. You will know when it is time to change the bulb when you can no longer see a blue glow through the front of the unit or when the LED above the UV button on the control panel is flashing. Check for proper installation. See changing the UV bulb. If that does not solve the issue, we recommend purchasing a replacement bulb.
To replace the UV Bulb, follow the below instructions:

1. Turn off the air purifier and unplug the unit
2. Allow the UV bulb to cool down for approximately 15 minutes before handling.
3. Remove the rear grill and HEPA filter.
4. Use screwdriver to remove two screws and detach the metal UV bulb access panel. Grab the UV bulb and gently pull it out of the lamp socket. (see Figures 4B & C).

UV lamp is a glass product, please handle it carefully. If desired, wear gloves to protect your hands.

• Ultraviolet-C light is emitted from the bulb when the unit is plugged in. Do not expose eyes or skin to direct light from ultraviolet light. Severe eye injury or irritation could result.
• UV lamp contains mercury. If the bulb breaks, do not vacuum or handle with your bare hands. Carefully sweep debris into a plastic bag and dispose properly at your local hazardous waste collection site.
• Do not attempt under any circumstance to clean the bulb, bulb holder or cover with water or wet solutions. This could result in electrical shock.

DISCARDING OF USED UV BULB
Discard the old UV bulb cartridge at a hazardous waste collection site per local, regional and national laws and codes. For instructions regarding the proper disposal of old bulb(s) and to locate a collection depot in your community, contact your local waste management authority or call 1-866-6666850 (www.lamprecycle.org). Bulb and bulb housing are not intended for use with any other product or purpose.

TROUBLESHOOTING

Unit will not operate

Decreased air flow

Excessive noise

REPLACEMENT PARTS
Replacement Parts can be purchased online at www.bionaire.com, or by calling 1-800-253-2764.

LEARNING MORE
If you have any questions regarding your product or would like to learn more about other Bionaire ® products, please contact our Consumer Service Department at 1-800-253-2764 or visit our website at www.bionaire.com.
© 2015 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Questions? Comments? Call 1-800-253-2764 in North America or visit our website at www.bionaire.com.

Documents / Resources

References

• Lamp Recycle – Environmental Responsiblility Starts Here

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Need Assistance?

Do you have a question about the BAP536UV-U that isn't answered in the manual? Leave your question here.

Thank you! Your question has been received!